Product Sections

All our stock is old, original, in excellent order and ready for use. We carry no modern or reproductions. We welcome your telephone calls +44 (0)1488 682317 or by email to hofgartner@belowstairs.co.uk for further information on any of the catalogue items or your other requirements or if you have any difficulties ordering through our system.

Online Catalogue > Bell Pushes & Bell Boards


Exterior Brass Electric Bell Push EP441
Exterior Brass Electric Bell Push EP441
Original, quality 1920's exterior electric bell push with an outside rim decorated with acanthus leaf forms in relief. This example has a central white ceramic push button detailed 'Press' two countersunk screw holes for mounting and has retained the original unpolished patinated finish but can be polished back to shiny brass for no extra cost on request. For use with a 12 volt, low voltage electric supply system. Other parts required to operate this system are usually available in stock, and many other bell fittings of differing types may also be available. Fully overhauled and is complete and in good and working order. 3.75" exterior diam and 1" diam to be recessed 1.5".

 
Click on photo for larger and other view.

Price: 230.00


5" Brass Exterior Electric Bell Push EP440
Original, quality 1920's larger than average brass exterior electric bell push with a sunflower design overall and with three screw holes for mounting. The white ceramic push button to the centre is detailed in black upper cased text "Press". For use with a 12 volt, low voltage electric supply system and other parts required to operate this system are usually available in stock. All is in the unpolished patinated green finish, fully overhauled and complete and in good and working order. A most unusual design.

 
Click on photo for larger and other view.

Price: 450.00


5



3
3" Brass Exterior Electric Bell Push EP439
Original, quality 1920's exterior brass electric bell push with a circular brass backplate with three countersunk screw holes for mounting and a large white ceramic central button detailed 'Press' in black upper cased text. For use with a 12 volt, low voltage electric supply system and other parts required to operate this system are usually available in stock. Fully overhauled and complete and in good and working order. 3" diam and 1" barrel to be recessed 1.75".

 
Click on photo for larger and other view.

Price: 185.00


3" Brass Exterior Electric Bell Push EP438
Original, quality 1920's exterior brass electric bell push with a circular brass backplate with two countersunk screw holes for mounting and a large white ceramic central button detailed 'Press' in black upper cased text. For use with a 12 volt, low voltage electric supply system and other parts required to operate this system are usually available in stock. Fully overhauled and complete and in good and working order. 3" diam and 1" barrel to be recessed 1.75".

 
Click on photo for larger and other view.

Price: 185.00


3



4.5
4.5" Brass Exterior Electric Bell Push EP437
Original, quality 1920's cast brass exterior electric bell push with a circular cast brass backplate with three countersunk screw holes for mounting and a large central white ceramic press button detailed 'Press' in upper case black text. For use with a 12 volt, low voltage electric supply system and other parts required to operate this system are usually available in stock. Has been fully overhauled and is complete and in good and working order. 4.5" exterior diam and 1.25" diam barrel to be recessed 2.5" deep.

 
Click on photo for larger and other view.

Price: 325.00


Brass Exterior Electric Bell Push EP436
Original, quality 1920's brass exterior electric bell push. For use with a 12 volt, low voltage electric supply system. Other parts required to operate this system are usually available in stock, and many other bell fittings of differing types may also be available. This example has a shaped outer surround with two countersunk screw holes for mounting and is detailed 'Press' in black upper cased text on the white ceramic central push button. Polished and lacquered, although the lacquer may be removed at no extra cost and complete and in good and working order. A most unusual shape. 4" diam and 1" barrel to be recessed 1.75" deep.

 
Click on photo for larger and other view.

Price: 265.00


Brass Exterior Electric Bell Push EP436



3.5
3.5" Exterior Brass Electric Bell Push EP435
Original, quality 1920's exterior brass electric bell push with a circular brass backplate with three countersunk screw holes for mounting and a large white ceramic central button detailed 'Press' in black upper cased text. For use with a 12 volt, low voltage electric supply system and other parts required to operate this system are usually available in stock. Fully overhauled and complete and in good and working order. 3.5" diam backplate. 
Click on photo for larger and other view.

Price: 230.00


Exterior Brass Electric Bell Push EP434
Original, quality 1920's larger than average exterior brass electric bell push, with a shaped backplate with four screw holes for mounting and a central white ceramic push button detailed 'Press' in upper cased text. For use with a 12 volt, low voltage electric supply system. Other parts required to operate this system are usually available in stock. Fully overhauled and complete and in good and working order. Backplate 4.75" x 2.5", 1.5" barrel to be recessed 1.5" deep. 
Click on photo for larger and other view.

Price: 300.00


Exterior Brass Electric Bell Push EP434



Exterior Brass Electric Bell Push EP433
Exterior Brass Electric Bell Push EP433
Original, quality 1920's exterior brass electric bell push, with a larger than average shaped backplate with four countersunk screw holes for mounting and a central white ceramic push button detailed 'Press' in upper cased text. For use with a 12 volt, low voltage electric supply system. Other parts required to operate this system are usually available in stock. Fully overhauled and complete and in good and working order. 4.25" x 2.5" x 1.5" barrel to be recessed 1.5" deep. 
Click on photo for larger and other view.

Price: 250.00


Interior Brass Electric Bell Push EP432
Original, quality 1920's cast brass interior electric bell push with a circular backplate with a beaded rim and three countersunk screw holes for mounting and a detailed domed outer cover with designs in relief of acanthus leaves and a central ivorine press button. This example is in the original matt gilt finish and is for use with a 12 volt, low voltage electric supply system. Other parts required to operate this system are usually available in stock. Fully overhauled and complete and in good and working order. Backplate 2.25" diam and total 1" front to back. 
Click on photo for larger and other views.

Price: 156.00


Interior Brass Electric Bell Push EP432



Exterior Brass Electric Bell Push EP431
Exterior Brass Electric Bell Push EP431
Original, quality 1920's exterior electric bell push in the original unused lacquered finish. The circular white ceramic push button is surrounded by a circular brass mount within a shaped outer backplate with two screw holes for mounting. The ceramic button is detailed 'Press' in upper cased black text, has been fully overhauled and is complete and in good and working order. 4.5" x 3.75" + 0.5" front to back when mounted and 1" diam to be recessed 0.75".

 
Click on photo for larger and other view.

Price: 285.00


Exterior Brass Electric Bell Push EP430
Original, quality 1920's circular brass exterior electric bell push with an embossed detail of acanthus leaves around the outer edge and a circular white ceramic push button to the centre, detailed "Press" in upper case black text. This example is in the unpolished patinated finish but can be polished back to shiney brass on request for no extra charge. Has been fully overhauled and is complete and in good and working order. 3.75" diam, 1.25" diam to be recessed 1.5".

 
Click on photo for larger and other view.

Price: 185.00


Exterior Brass Electric Bell Push EP430



Brass Exterior Electric Bell Push, 3 matching available EP429
Brass Exterior Electric Bell Push, 3 matching available EP429
Original, quality 1920's brass exterior electric bell push in the original unpolished patinated finish. For use with a 12 volt, low voltage electric supply system and other parts required to operate this system are usually available in stock. This super example has a decorative outer shaped backplate, two countersunk screw holes for mounting and a white ceramic push button to the centre detailed 'Press' in black upper cased text. These can be polished back to the brass, on request for no extra cost. Fully overhauled and complete and working order. 4" diam and 1" diam to be recessed 1.75". Price is for each. If ordering online, please state which one in the picture is required.  
Click on photo for larger and other view.

Price: 230.00


4" Brass Exterior Electric Bell Push EP427
Original, quality 1920's cast brass exterior electric bell push with a circular cast brass backplate with three countersunk screw holes for mounting and a large central white ceramic press button detailed 'Press' in upper case black text. For use with a 12 volt, low voltage electric supply system and other parts required to operate this system are usually available in stock. Has been fully overhauled and is complete and in good and working order. 4" exterior diam and 1.5" diam barrel to be recessed 1.75" deep.

 
Click on photo for larger and other views.

Price: 260.00


4



2.5
2.5" Brass Exterior Bell Push EP425
Original, quality 1920's brass exterior bell push with a circular brass backplate with two countersunk screw holes for mounting and a central white ceramic push button detailing 'Press' in black type. For use with a 12 volt, low voltage electric supply system, other parts required to operate this system are usually available in stock. Fully overhauled, polished and complete and in good and working order. 2.5" diam and 0.75" diam to be recessed 1.5". 
Click on photo for larger and other view.

Price: 125.00


Interior Electric Bell Push EP422
Original, quality 1920's circular brass heavy duty interio, electric bell push with a domed front cover with three screw holes for mounting and a central press button in bakelite. Fully overhauled, polished and lacquered, although the lacquer may be removed at no extra cost. For use with a 12 volt, low voltage electric supply system. Other parts required to operate this system are usually available in stock. Can be used externally if mounted with a mastic seal. Complete and in good and working order. 3" diam and 2.25" diam x 1" to be recessed. 
Click on photo for larger and other view.

Price: 115.00


Interior Electric Bell Push EP422



Foot Operated Electric Call Bell EP420
Foot Operated Electric Call Bell EP420
Original, quality 1920's foot operated servants electric call bell, used at the table to call for change of course. This super example has a thick mahogany back mount, with a chromed central push button for use with a 12 volt, low voltage electric supply system. Other parts required to operate this system are usually available in stock and many other bell fittings of differing types may well be available. Fully overhauled and complete and in good and working order. A most unusual item to find. 3.5" diam and 1.5" front to back.  
Click on photo for larger and other view.

Price: 145.00


Interior Mahogany Electric Bell Push EP419
Original, quality 1920's interior electric bell push turned in mahogany in two sections, with a white press button to the centre ceramic. For use with a 12 volt, low voltage electric supply system. Other parts required to operate this system are usually available in stock and many other bell fittings of differing types may well be available. Complete and in good and working order. 2" diam and 1" front to back.  
Click on photo for larger and other view.

Price: 65.00


Interior Mahogany Electric Bell Push EP419



Interior Mahogany Electric Bell Push 3 available EP418
Interior Mahogany Electric Bell Push 3 available EP418
Original, quality 1920's interior electric bell push turned in mahogany in two sections, with a white press button to the centre. One is ceramic and two are ivory. For use with a 12 volt, low voltage electric supply system. Other parts required to operate this system are usually available in stock and many other bell fittings of differing types may well be available. One small chip to the on one only top rim otherwise complete and in good and working order. 1.75" diam and 1" front to back. Price is for each. 
Click on photo for larger and other view.

Price: 65.00


Interior Walnut Electric Bell Push 4 matching available EP417
Original, quality 1920's turned walnut interior electric bell push in two sections with an ivory press button, For use with a 12 volt, low voltage electric supply system. Other parts required to operate this system are usually available in stock and many other bell fittings of differing types may well be available. Fully overhauled and complete and in good and working order. 2.25" diam and 1" front to back. Price is for each. 
Click on photo for larger and other view.

Price: 65.00


Interior Walnut Electric Bell Push 4 matching available EP417



Interior Electric Bell Push EP412
Interior Electric Bell Push EP412
Original, quality 1920's small turned mahogany interior electric bell push, with two circular sections and a central ivory push button. For use with a 12 volt, low voltage electric supply system and other parts required to operate this system are usually available in stock. Many other bell fittings of differing types may well be available also. All has been fully overhauled and complete and in good and working order. 2" diam and 1" front to back.  
Click on photo for larger and other view.

Price: 65.00


Brass Interior Bell Push EP409
Original, quality 1920's brass interior electric bell push, for use with a 12 volt, low voltage electric supply system. Other parts required to operate this system are usually available in stock and many other bell fittings of differing types may well be also. This example has a decorative backplate in the art nouveau style, a domed centre and a black composition button. Polished and lacquered, although the lacquer may be removed at no extra cost and all fully overhauled and complete and in good and working order. Backplate 4" diam. and 1" front to back. 
Click on photo for larger and other view.

Price: 156.00


Brass Interior Bell Push EP409



4
4" Brass Exterior Electric Bell Push EP408
Original, quality 1920's brass exterior electric bell push with a circular cast brass backplate with two countersunk screw holes for mounting and a central white ceramic press button. For use with a 12 volt, low voltage electric supply system. Other parts required to operate this system are usually available in stock. All has been fully overhauled and is complete and in good and working order. 4" diam and 1"diam to be recessed by 1.75".

 
Click on photo for larger and other view.

Price: 156.00


Interior Brass Electric Bell Push EP405
Original, quality 1920's cast brass interior electric bell push in the aesthetic movement style with 4 screw holes for mounting. For use with a 12 volt, low voltage electric supply system. Other parts required to operate this system are usually available in stock and many other bell fittings of differing types may also be available. Has been fully overhauled, polished and lacquered, although the lacquer may be removed at no extra cost. Complete and in good and working order. 4.5" square and 1.5" front to back. 
Click on photo for larger and other view.

Price: 230.00


Interior Brass Electric Bell Push EP405



Exterior Brass Electric Bell Push EP404
Exterior Brass Electric Bell Push EP404
Original, quality 1920's cast brass exterior electric bell push with a very decorative backplate, 2 countersunk screw holes for mounting and a white ceramic central press button detailed 'Press' in upper case black text. For use with a 12 volt, low voltage electric supply system. Other parts required to operate this system are usually available in stock and many other bell fittings of differing types may also be available. Has been fully overhauled and is complete and in good and working order. Backplate 5.75" x 2". 
Click on photo for larger and other view.

Price: 265.00


Pair of Interior Electric Bell Pushes EP403
Pair of original, quality 1920's, very decorative circular cast brass interior electric bell pushes with central ivory push buttons. The brass backplates have inner and outer beaded decoration and a circle of flower heads similar to anemone. All has been fully overhauled, polished and lacquered, although the lacquer may be removed at no extra cost. Complete and in good and working order. 3.5" diameter and 1" front to back. 
Click on photo for larger and other view.

Price: 400.00


Pair of Interior Electric Bell Pushes EP403



Copper Exterior Electric Bell Push EP402
Copper Exterior Electric Bell Push EP402
Original, quality 1920's / 30's, exterior electric bell push with a horizonal rectangular shaped copper backplate in the original bronze finish with four countersunk screw holes for mounting and a central white ceramic push button detailing "Press" in black upper cased text. For use with a 12 volt, low voltage electric supply system. Other parts required to operate this system are usually available in stock and many other bell fittings of differing types may also be available. This example has an Arts and Crafts feel about it and can be polished to the copper if required. The press detail is rather worn, but otherwise all is complete and in good and working order. Backplate 5.5" x 2.5" and 1.5" x 0.75" to be recessed.  
Click on photo for larger and other view.

Price: 156.00


Brass Exterior Electric Bell Push EP397
Original, quality 1920's, decorative shaped cast brass exterior electric bell push with a white ceramic central press button detailed "Press" in black upper cased text. This most unusual shaped backplate has a pointed top and bottom section in the form of a church window. For use with a 12 volt, low voltage electric supply system. Other parts required to operate this system are usually available in stock and many other bell fittings of differing types may also be available. Fully overhauled, complete and in good and working order. Backplate 5" x 2" and 1" exposed, 1.5" x 1" to be recessed. 
Click on photo for larger and other view.

Price: 230.00


Brass Exterior Electric Bell Push EP397



Brass Exterior Electric Bell Push EP395
Brass Exterior Electric Bell Push EP395
Original, quality 1920's, decorative shaped cast brass exterior electric bell push with a bone central press button. This most unusual shaped backplate has a pointed top and bottom section in the form of a church window. For use with a 12 volt, low voltage electric supply system. Other parts required to operate this system are usually available in stock and many other bell fittings of differing types may also be available. Fully overhauled, complete and in good and working order. Backplate 5" x 2" and 1" diameter to be recessed 1.5" deep. 
Click on photo for larger and other view.

Price: 200.00


3.5" Exterior Electric Bell Push EP389
Original, quality 1920's, circular brass exterior electric bell push with a central white ceramic button detailed "Press" in faint upper cased black text. This example has two countersunk screw holes for mounting and is for use with a 12 volt, low voltage electric supply system. Other parts required to operate this system are usually available in stock and many other bell fittings of differing types may also be available. Fully overhauled, complete and in good and working order. 3.5" diameter x 1", to be recessed 1.75". 
Click on photo for larger and other view.

Price: 156.00


3.5



Chrome Interior Electric Bell Push, 5 matching available EP388
Chrome Interior Electric Bell Push, 5 matching available EP388
Original, quality 1920's/30's, unused white ceramic interior electric bell push with an ivorine "Press" button and a chromed domed cover. For use with a 12 volt, low voltage electric supply system. Other parts required to operate this system are usually available in stock and many other bell fittings of differing types may also be available. Fully overhauled, complete and in good and working order. 2" diameter x 1.5" front to back. Price is for each. 
Click on photo for larger and other views.

Price: 75.00


Brass and Copper Interior Electric Bell Push EP385
Original, quality, circular cast brass and copper interior electric bell press, circa 1900, with a laurel wreath design to the cover and a turned bone central press button. For use with a 12 volt, low voltage electric supply system. Other parts required to operate this system are usually available in stock. Fully overhauled, complete and in good and working order. 2.5" diameter x 1.25" front to back. This unusual example could also be wired up for a table call bell press if required. 
Click on photo for larger and other views.

Price: 200.00


Brass and Copper Interior Electric Bell Push EP385



Brass Interior Electric Bell Push EP371
Brass Interior Electric Bell Push EP371
Original, quality 1920's, interior electric bell push, for use with a 12 volt, low voltage electric supply system. Other parts required to operate this system are usually available in stock. This example, in the original matt gilt finish, has a cast brass front dome cover embossed with acanthus leaf decorations and a roseatte to the face of the push button and a beaded outer to the backplate. Fully overhauled, polished and lacquered, although the lacquer may be removed at no extra cost. Complete and in good and working order. 2.25" diameter x 1" front to back.  
Click on photo for larger and other view.

Price: 125.00


Bakelite Electric Bell Press EP368
Original, quality 1920's / 30's, electric pendant bell press, rewired with new two core silk covered flex and for use with a 12 volt, low voltage electric supply system. Other parts required to operate this system are usually available in stock and many other bell fittings of differing types may well be available. This example has a long tapered bakelite switch with an ivorine push button. Fully overhauled and complete and in good and working order. Switch 3.5" tall including fittings and 1.25" diameter, plus 6ft flex.  
Click on photo for larger view.

Price: 115.00


Bakelite Electric Bell Press EP368



Pendant Electric Bell Press EP367
Pendant Electric Bell Press EP367
Original, quality 1920's, electric pendant bell press, rewired with new two core silk covered flex and for use with a 12 volt, low voltage electric supply system. Other parts required to operate this system are usually available in stock and many other bell fittings of differing types may well be available. This unusual example turned in Walnut has ivorine fittings and is fashioned in the form of an acorn. Fully overhauled and complete and in good and working order. Switch 3" tall including fittings and 1.25" diameter, plus 9ft flex.  
Click on photo for larger view.

Price: 115.00


Brass Interior Electric Bell Push EP360
Original, quality 1920's, cast brass interior electric bell push, with a very decorative face with detail of acanthus leaves, a brass push button to the centre and two screw holes for mounting. For use with a 12 volt, low voltage electric supply system. Other parts required to operate this system are usually available in stock and many other bell fittings of differing types may also be available. Fully overhauled, polished and lacquered, although the lacquer may be removed at no extra cost and complete and in good and working order. 3" x 2.5" and 1.5" diameter x 0.75" to be recessed.  
Click on photo for larger and other views.

Price: 135.00


Brass Interior Electric Bell Push EP360



3
3" Exterior Brass Electric Bell Push, 2 available EP356
Original, quality 1920's, circular brass exterior electric bell push, with a central brass press button to the centre and two countersunk screw holes for mounting. For use with a 12 volt, low voltage electric supply system. Other parts required to operate this system are usually available in stock and other similar bell presses may also available on request. Fully overhauled, polished and complete and in good and working order. 3" diameter, 1" to be recessed, 1.75" deep. Price is for each. 
Click on photo for larger and other view.

Price: 115.00


Art Nouveau Brass Interior Electric Bell Push, 3 matching available EP348
Original, quality, unused pressed brass interior electric bell push in a serious Art Nouveau design. The circular cast brass bell push is mounted on the backplate which has four screw holes for fixing. This backplate has deep relief forms of styalised poppy seed heads with stems and leaves and the reverse is stamped with the registration number for the year 1904. All has been polished and lacquered, although the lacquer may be removed at no extra cost. Fully overhauled, complete and in good and working order. 4" tall x 3.75" wide and 1" front to back. Price is for each. 
Click on photo for larger and other view.

Price: 350.00


Art Nouveau Brass Interior Electric Bell Push, 3 matching available EP348



Electric Table Call Bell EP330
Electric Table Call Bell EP330
Original, quality 1920's, electric call bell as used from the bedside table to call the nurse or servant or from the dining table to change the course. This example has a malachite push button to the centre of the square onyx mount and has been rewired with two core electric flex. For use with a 12 volt, low voltage electric supply system. Other parts required to operate this system are usually available in stock. Mount 2.25" square x 0.75" tall.  
Click on photo for larger and other view.

Price: 115.00


Pendant Electric Bell Press, 2 available EP287
Original, quality 1920's, electric pendant bell push, rewired with new two core silk covered flex and for use with a 12 volt, low voltage electric supply system. Other parts required to operate this system are usually available in stock. This most unusual example is turned in walnut in three sections, has four ivory 'press' buttons instead of the normal one, but they only operate just the one bell. Fully overhauled and complete and in good and working order. Switch 4.25" x 2" and 72" flex. Price is for each. 
Click on photo for larger view.

Price: 156.00


Pendant Electric Bell Press, 2 available EP287



Ceiling Rose for Electric Bell Pendant Switch, 4 available EP277
Ceiling Rose for Electric Bell Pendant Switch, 4 available EP277
Original, quality 1920's, circular, ceiling mounted, two piece turned lignum vitae ceiling rose, with a central grommet in bone. Will take a low voltage electric bell pendant switch. Fully overhauled and complete and in good and working order. Lignum Vitae is heavy and hard and one of the few woods that with not float. 2.5" diameter x 1" front to back. Price is for each. 
Click on photo for larger and other view.

Price: 85.00


Wooden Interior Electric Bell Pull EP215
Original, quality 1920's, two piece, superb interior electric bell pull, turned in beech for use with a 12 volt, low voltage electric supply system. Other parts required to operate this system are usually available in stock and many other bell fittings of differing types may also be available. These pulls were used with the tapestry pulls to operate with the electric system. Most unusual to find these. Fully overhauled, complete and in good and working order. 2.75" diameter x 1.5" front to back.  
Click on photo for larger and other views.

Price: 125.00


Wooden Interior Electric Bell Pull EP215



Boxwood Interior Electric Bell Pull EP214
Boxwood Interior Electric Bell Pull EP214
Original, quality 1920's, two piece, superb interior electric bell pull, turned in boxwood, for use with a 12 volt, low voltage electric supply system. Other parts required to operate this system are usually available in stock and many other bell fittings of differing types may also be available. These pulls were used with the tapestry pulls to operate with the electric system. Most unusual to find these and what a gem in boxwood. Fully overhauled, complete and in good and working order. 2.5" diameter x 2" front to back.  
Click on photo for larger and other views.

Price: 145.00


Twin Electric Bell Push EP35
Original quality, 1920's, continental exterior bell push panel, consisting of two brass bell pushes mounted on a rectangular slab of veined dark marble, with a stop chamfer to the edges. The other parts required to operate this system are usually available in stock. Has been fully overhauled and is complete and in good and working order. 8.25" x 4" x 0.75" and 1.25" to be recessed. 
Click on photo for larger and other view.

Price: 230.00


Twin Electric Bell Push EP35



Electric Indicator Bell EB298
Electric Indicator Bell EB298
Original, quality 1920's electric indicator bell with a brass external bell mounted on a teak backboard with a lift off teak cover to the coil etc. For use with a 12 volt, low voltage electric supply system. As used with servants indicators, bell presses and telephone extensions. Other parts required to operate this system are usually available in stock and other similar bells may be available on request. The brass has been polished and lacquered, although the lacquer may be removed at no extra cost, fully overhauled and complete and in good and working order. 7.25" x 4" x 4" front to back  
Click on photo for larger and other view.

Price: 135.00


Electric Indicator Bell EB297
Original, quality 1920's electric indicator bell with a brass external bell mounted on a teak backboard with a lift off teak cover to the coil etc. For use with a 12 volt, low voltage electric supply system. As used with servants indicators, bell presses and telephone extensions. Other parts required to operate this system are usually available in stock and other similar bells may be available on request. The brass has been polished and lacquered, although the lacquer may be removed at no extra cost, fully overhauled and complete and in good and working order. 7.5" x 3.5" x 4.25" front to back  
Click on photo for larger and other view.

Price: 135.00


Electric Indicator Bell EB297



Electric Indicator Bell EB296
Electric Indicator Bell EB296
Original, quality 1920's electric indicator bell with a brass external bell mounted on a teak backboard with a lift off teak cover to the coil etc. For use with a 12 volt, low voltage electric supply system. As used with servants indicators, bell presses and telephone extensions. Other parts required to operate this system are usually available in stock and other similar bells may be available on request. The brass has been polished and lacquered, although the lacquer may be removed at no extra cost and has been fully overhauled. One grain split to the teak cover of the coil otherwise complete and in good and working order. 7" x 4" x 2". 
Click on photo for larger and other view.

Price: 135.00


Electric Indicator Bell EB295
Original, quality 1920's electric indicator bell with a brass external bell mounted on a teak backboard with a lift off teak cover to the coil etc. For use with a 12 volt, low voltage electric supply system. As used with servants indicators, bell presses and telephone extensions. Other parts required to operate this system are usually available in stock and other similar bells may be available on request. The brass has been polished and lacquered, although the lacquer may be removed at no extra cost and fully overhauled and all is complete and in good and working order. 7" x 4" x 2". 
Click on photo for larger and other view.

Price: 135.00


Electric Indicator Bell EB295



Electric Indicator Bell EB289
Electric Indicator Bell EB289
Original, quality 1920's, electric indicator bell with an external brass bell mounted on a teak backboard, with a lift off teak cover to the coil. For use with a 12 volt, low voltage electric supply system. Other parts required to operate this system are usually in stock, suitable interior and exterior bell pushes are usually available upon request and many other bell fittings of differing types may also be available. Fully overhauled, the brass has been polished and lacquered, although the lacquer may be removed at no extra cost and all is complete and in good and working order. 7.5" tall x 4" wide and 2.25" front to back.  
Click on photo for larger and other view.

Price: 135.00


Electric Indicator Bell EB283
Original, quality 1920's, electric indicator bell with an external steel bell mounted on a teak backboard, with a lift off teak cover to the coil. For use with a 12 volt, low voltage electric supply system. Other parts required to operate this system are usually in stock, suitable interior and exterior bell pushes are usually available upon request and many other bell fittings of differing types may also be available. Fully overhauled and all is complete and in good and working order. 8" tall x 4.25" wide and 2.25" front to back.  
Click on photo for larger and other view.

Price: 135.00


Electric Indicator Bell EB283



Electric Indicator Bell EB236
Electric Indicator Bell EB236
Original, quality 1920's, electric indicator bell, with a steel external bell, mounted on a teak backboard, with a teak lift off cover to the coil etc. For use with a 12 volt, low voltage electric supply system, as used with servants indicators, bell presses and telephone extensions. Other parts required to operate this system are usually available in stock. This example is unusual is shape, much longer than normal, the metalwork has been polished and lacquered, although the lacquer may be removed at no extra cost. All has been fully overhauled and is complete and in good and working order. 10" x 4" and 2" front to back. 
Click on photo for larger and other view.

Price: 135.00


Brass Push Plaque NP230
Original, quality pre-war, rectangular shaped brass plaque detailing vertically "Push" in upper cased text and infilled with black and with four countersunk screw holes for mounting. Good for doors or electric bell pushes. Polished and lacquered, although the lacquer may be removed at no extra cost. Complete and in good order. 6" x 2". A matching "Pull" plaque may well be available reference code NP229. 
Click on photo for larger and other view.

Price: 56.00


Brass Push Plaque   NP230



Brass Push Plaque   NP203
Brass Push Plaque NP203
Original, quality, late 19th century, cast brass rectangular shaped plaque with embossed decoration to the border and "Push" in upper cased text. This unusual example has four countersunk screw holes for mounting and is impressedto the reverse with the sun logo and " WT&S" for the manufacturer 'William Tonks & Son, of Birmingham'. Ideal for electric bell presses or swing doors. Polished and lacquered, although the lacquer may be removed at no extra cost. Complete and in good order. 3.25" x 2".  
Click on photo for larger and other view.

Price: 65.00


Chromed Push Plate, 2 available NP120
Original, quality, 1930's, chrome on brass, rectangular plaque detailing 'Push' in recessed black, and with four countersunk screw holes for mounting. Ideal for electric bell pushes or swing doors. Polished and lacquered, although the lacquer may be removed if required at no extra cost. Complete and in good order. 3.5" x 2.25". Price is for each. 
Click on photo for larger and other views.

Price: 45.00


Chromed Push Plate, 2 available   NP120



Brass Push Plaque, 3 available    NP83
Brass Push Plaque, 3 available NP83
Original quality, 1920's, pink brass rectangular plaque inlaid in white enamel in upper case 'Push' and with four countersunk screw holes for mounting. Ideal for bell pushes or swing doors. Polished and lacquered, although the lacquer may be removed if required at no extra cost. The white enamel inlay is a little discoloured, otherwise all is complete and in good order. 2.5" x 1.5". Price is for each. 
Click on photo for larger and other views.

Price: 34.00


Police Cells Electric Indicator Board IB302
Original, quality small 1920's electric indicator board in a teak cabinet with two windows on a black glazed panel with red and white indicator flags. For use with a 12 volt, low voltage electric supply system. Other parts required to operate this system are usually available in stock. This example is detailed for "Cells 1 and 2" and "Gents of Leicester" for the maker. Fully overhauled and complete and in good and working order. 8" x 5.5" x 2.25" front to back.  
Click on photo for larger and other views.

Price: 156.00


Police Cells Electric Indicator Board IB302



Electric Indicator Board IB301
Electric Indicator Board IB301
Original, quality electric indicator board circa 1900, in a teak cabinet with four windows on a black glazed panel with red star indicators. For use with a 12 volt, low voltage electric supply system. Other parts required to operate this system are usually available in stock and suitable interior, and exterior bell pushes are usually available upon request. This example is detailed "Dining Room", "Drawing Room", "Bedroom 1" and "Bedroom 2". Fully overhauled and complete and in good and working order. Backboard 14.5" x 6.75" and total 2.75" front to back.  
Click on photo for larger and other view.

Price: 230.00


Huge Electric Indicator Board IB269
Original, quality, late 19th century, large electric indicator board in a teak cabinet. This example has 40 windows on a black glazed panel with gilt surrounds to each rectangular window and red and white vertical striped card indicators. Each window is numbered above in gilt with various numbers from "100" to "323". For use with a 12 volt, low voltage electric supply system. Other parts required to operate this system are usually available in stock, suitable interior and exterior bell pushes are usually available upon request and many other bell fittings of differing types may also be available. A very large great looking indicator board, fully overhauled and complete and in good and working order. Backboard 38" x 23", total 3.5" front to back.  
Click on photo for larger and other views.

Price: 850.00


Huge Electric Indicator Board IB269



Electric Indicator Board IB250
Electric Indicator Board IB250
Original, quality 1920's, electric indicator board in a teak cabinet, with 18 windows on a black glazed panel, gilt surrounds to each circular window and white card indicators. The left hand windows are marked "Ground Floor Rooms" numbered 1 to 9, with "WC" and "Bath" and the right half is marked "First Floor Rooms" numbered 10 to 18" and again "WC" and "Bath". The glass is also detailed to the corner for the supplier / fitter "P.E.D Allum Ltd" and "Ringwood 1161" this Ringwood is in Hampshire. The top of the glass is also detailed "Gents of Leicester" for the manufacturer. For use with a 12 volt, low voltage electric supply system. Other parts required to operate this system are usually available in stock and suitable interior and exterior bell pushes are also usually available. Fully overhauled and complete and in good and working order. 20.75" x 12.75" and 3.5" front to back. 
Click on photo for larger and other views.

Price: 300.00


Electric Indicator Board IB238
Original, quality, electric indicator board, circa 1900, in a teak cabinet, with two windows on a white background behind the glass panel and red on white star indicators. For use with a 12 volt, low voltage electric supply system. Other parts required to operate this system are usually available in stock and suitable interior and exterior bell pushes are usually available upon request. This example is detailed "Door" and "Office" and has a heavier than normal cabinet. Fully overhauled, complete and in good and working order. Backboard 11" x 8.5" and total 3.5" front to back. 
Click on photo for larger and other views.

Price: 230.00


Electric Indicator Board IB238



Electric Indicator Board IB224
Electric Indicator Board IB224
Original, quality, electric indicator board, circa 1900, in a teak cabinet, with five windows on a black glazed panel with red and white striped indicators. For use with a 12 volt, low voltage electric supply system and other parts required to operate this system are usually available in stock. This example is detailed "Front Door", "Sitting Room", "Bedroom", "Bath" and "Back Door" for the windows. This very clear example is most unusual being vertical in form. All has been fully overhauled and is complete and in good and working order. Backboard 16.75" x 7.5" and 3.25" front to back. 
Click on photo for larger and other view.

Price: 350.00


Electric Indicator Board IB223
Original, quality, electric indicator board, circa 1900, in a teak cabinet, with six windows on a black glazed panel with red and white striped indicators. For use with a 12 volt, low voltage electric supply system and other parts required to operate this system are usually available in stock. This example is detailed "Front Door", "General Room", "Bar Parlour", "Smoke Room", "Bar" and "Bathroom" for the windows and "Gatley and Co, Electrical Engineer, Todmorden" for the supplier / fitter. All has been fully overhauled and is complete and in good and working order. Backboard 12" x 10.75" and 3" front to back. 
Click on photo for larger and other view.

Price: 300.00


Electric Indicator Board IB223



Electric Indicator Board IB210
Electric Indicator Board IB210
Original, quality, electric indicator board, circa 1900, in a teak cabinet, with five windows on a black glazed panel, with red star on white indicators and detailing above just two "Dining Room" and "Oak Parlour". This board is for use with a 12 volt, low voltage electric supply system. Other parts required to operate this system are usually available in stock and many other bell fittings of differing types and suitable interior and exterior bell pushes are also available upon request. Complete and in good and working order. Backboard 11.5" x 12.25" and 3" front to back. 
Click on photo for larger and other view.

Price: 230.00


Electric Indicator Board IB209
Original, quality, electric indicator board, circa 1900, in a teak cabinet, with four windows on a black glazed panel, with white indicators and detailing over each "L", "M", "N", "P" and for the maker / electrical installer "J.G Cole Electrics England, 34 Simmerhill Road, South Tottenham N London". This board is for use with a 12 volt, low voltage electric supply system. Other parts required to operate this system are usually available in stock, many other bell fittings of differing types and suitable interior and exterior bell pushes are also available upon request. Complete and in good and working order. We would be interested to know the meaning of "L.M.N and P". Backboard 16.5" x 9.75" and 3.25" front to back. 
Click on photo for larger and other view.

Price: 230.00


Electric Indicator Board IB209



Electric Indicator Board, 3 identical available IB172
Electric Indicator Board, 3 identical available IB172
Original, quality 1920's, electric indicator board in a light coloured teak cabinet, with two windows in a black glazed panel with red circular indicators. For use with a 12 volt, low voltage electric supply system, other parts required to operate this system are usually available in stock. This example is detailed "First Floor Bedroom", "19" and "20" and is marked for the manufacturer / supplier / installer 'Gent of Leicester'. All has been fully overhauled and is complete and in good and working order. 13.25" x 7" and 3.5" front to back. Price is for each. 
Click on photo for larger and other views.

Price: 135.00


Electric Indicator Board IB46
Original quality electric indicator board, circa 1900, in a teak cabinet with a mahogany front and a ply backboard. The front black glazed panel has twenty windows with gilt room numbers and white card indicators also with room numbers on. For use with a 12 volt low voltage electric supply system. The coil and indicator is missing from room 20 but otherwise all has been overhauled and is complete and in good and working order. The other parts required to operate this bell system are usually available in stock. 19.5" wide x 17" x 3.25" front to back. 
Click on photo for larger and other view.

Price: 485.00


Electric Indicator Board IB46

Online Catalogue > Bell Pushes & Bell Boards


Buy now with PayPal